Generators
How to Determine the Right Generator Capacity for Your Power Requirement
Generator selection should start with a load assessment, not guesswork. List the equipment that must run, its rated power, starting surge and whether items operate at the same time. Motors, pumps, air conditioners and compressors can require a higher starting current than their normal running load.
Read full article
Generator selection should start with a load assessment, not guesswork. List the equipment that must run, its rated power, starting surge and whether items operate at the same time. Motors, pumps, air conditioners and compressors can require a higher starting current than their normal running load.
A qualified engineer should review both kW and kVA, power factor, starting method, operating hours, site conditions and allowance for future loads. Avoid sizing a set only from the sum of nameplate watts, and avoid choosing an unnecessarily large set: sustained light loading can also be undesirable. Share your equipment list and operating priorities with a power professional before purchase.
Planning note: Every site is different. Confirm specifications and installation requirements with a qualified professional before making equipment or safety decisions.
Maintenance & Troubleshooting
Generator Maintenance: Practical Checks Before a Breakdown
Reliable standby power depends on planned maintenance and a clear service record. Follow the manufacturer’s service intervals for oil, filters, coolant, belts, battery and other consumables. Keep the generator area clean, dry, ventilated and free of stored materials.
Read full article
Reliable standby power depends on planned maintenance and a clear service record. Follow the manufacturer’s service intervals for oil, filters, coolant, belts, battery and other consumables. Keep the generator area clean, dry, ventilated and free of stored materials.
Before a planned test, check for visible leaks, unusual sounds, warning indicators and battery condition only when it is safe to do so. Keep air inlets and exhaust paths unobstructed. Do not remove guards or work on hot, moving or energised equipment. Arrange qualified servicing and periodic load testing appropriate to the set and site. Record run hours, faults, service dates and corrective work.
Planning note: Every site is different. Confirm specifications and installation requirements with a qualified professional before making equipment or safety decisions.
Solar & Renewable Energy
Solar, Inverter and Battery Systems: What Each Component Does
Solar panels convert sunlight into DC electricity. An inverter converts DC power into usable AC power for compatible loads. Batteries store energy for use when solar generation is low or unavailable, subject to system design and battery limits. Charge controllers and hybrid-inverter controls manage energy flows and charging.
Read full article
Solar panels convert sunlight into DC electricity. An inverter converts DC power into usable AC power for compatible loads. Batteries store energy for use when solar generation is low or unavailable, subject to system design and battery limits. Charge controllers and hybrid-inverter controls manage energy flows and charging.
The right arrangement depends on daytime use, night-time demand, grid availability, critical loads, roof or ground space, shading, and how much backup time is required. Battery capacity (kWh) describes stored energy, while inverter power (kW or kVA) describes how much load it can supply at a moment. These are different measures. Use compatible components and have protection, earthing and installation checked by a qualified professional.
Planning note: Every site is different. Confirm specifications and installation requirements with a qualified professional before making equipment or safety decisions.
Electrical Engineering
Electrical Load Survey: Why It Matters Before Sizing Backup Power
An electrical load survey documents the equipment a site uses and how it is used. It considers rated demand, starting currents, duty cycles, operating schedules, essential loads and likely expansion. Where practical, measurements across representative operating periods can reveal peaks that a simple equipment list misses.
Read full article
An electrical load survey documents the equipment a site uses and how it is used. It considers rated demand, starting currents, duty cycles, operating schedules, essential loads and likely expansion. Where practical, measurements across representative operating periods can reveal peaks that a simple equipment list misses.
A good survey helps compare generator, inverter, battery and solar options on a common basis. It can also identify opportunities to separate essential circuits, manage simultaneous loads and avoid paying for capacity that is not needed. The output should be a clear load schedule and design assumptions that can be reviewed before equipment procurement or installation.
Planning note: Every site is different. Confirm specifications and installation requirements with a qualified professional before making equipment or safety decisions.
Power & Energy Tips
Generator vs Solar + Battery: When Each May Be Appropriate
A generator can provide sustained power when fuel is available and the set is correctly sized and maintained. Solar with batteries can reduce dependence on fuel and provide quiet operation, but performance depends on solar conditions, storage capacity, inverter limits and how loads are managed. A combined system may suit sites with variable supply needs.
Read full article
A generator can provide sustained power when fuel is available and the set is correctly sized and maintained. Solar with batteries can reduce dependence on fuel and provide quiet operation, but performance depends on solar conditions, storage capacity, inverter limits and how loads are managed. A combined system may suit sites with variable supply needs.
Compare the loads to be supported, required backup duration, daily energy use, available space, noise limits, fuel logistics, maintenance capability and total lifecycle cost. Do not compare generator kVA directly with battery kWh: one describes power capacity and the other energy storage. A site assessment is the best basis for a fair comparison.
Planning note: Every site is different. Confirm specifications and installation requirements with a qualified professional before making equipment or safety decisions.
Safety
Practical Power Safety Tips for Homes and Businesses
Electrical and generator safety begins with correct installation, suitable protection and routine inspection. Keep generators outdoors in a properly ventilated location, well away from doors, windows and air intakes. Never run a generator indoors, in an enclosed room or in a garage because exhaust can contain lethal carbon monoxide.
Read full article
Electrical and generator safety begins with correct installation, suitable protection and routine inspection. Keep generators outdoors in a properly ventilated location, well away from doors, windows and air intakes. Never run a generator indoors, in an enclosed room or in a garage because exhaust can contain lethal carbon monoxide.
Never connect a generator to building wiring through an ordinary wall socket. A properly designed changeover or transfer arrangement is needed to prevent dangerous back-feeding. Keep water away from electrical equipment, use correctly rated cables and protective devices, and do not bypass earthing or safety controls. Stop using equipment that shows overheating, burning smells, exposed conductors or repeated tripping and call a qualified electrician.
Planning note: Every site is different. Confirm specifications and installation requirements with a qualified professional before making equipment or safety decisions.